Controllers
SIPLUS S7-300 SM 334 4 AI 2 AO based on 6ES7334-0KE00-0AB0 with conformal coating, -25…+70 °C, analog module isolated, 4 AI/2 AO, 12 bit, 0-10 V for Pt100 (climatic range -120-155 degrees) and 10 kOhm measuring range, 1x 20-pole
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 SM 336 F 6 AI 15 bit based on 6ES7336-4GE00-0AB0 with conformal coating, -25…+60 °C, 70° with forced convection, fail-safe analog inputs for SIMATIC Safety, with HART support, up to category 4 (EN 954-1) /SIL3 (IEC 61508)/ PLE (ISO 13849), 1x 20-pole
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 CP 340 RS-232 based on 6ES7340-1AH02-0AE0 with conformal coating, -25…+60 °C, communications processor with RS-232C interface (RS-232-C) incl. configuration package on CD-ROM
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 CP 340 RS-422/485 based on 6ES7340-1CH02-0AE0 with conformal coating, -25…+60 °C, communications processor with RS-422/485 interface incl. configuration package on CD-ROM
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 CP 341 based on 6ES7341-1AH02-0AE0 with conformal coating, -25…+70 °C, communications processor with RS-232C interface (RS-232-C) incl. configuration package on CD-ROM
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 CP 341 RS-422/485 based on 6ES7341-1CH02-0AE0 with conformal coating, -25…+70 °C,
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET CP 342-5 PROFIBUS based on 6GK7342-5DA03-0XE0 with conformal coating, -25…+70 °C, communications processor CP 342-5 for connecting SIMATIC S7-300 to PROFIBUS, DP, S5-compatible, PG/OP and S7 communication
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET CP 343-1 Lean based on 6GK7343-1CX10-0XE0 with conformal coating, -25…+60 °C, communications processor for connection of SIMATIC S7-300 to Industrial Ethernet via TCP/IP and UDP, multicast, send/receive with and without RFC1006, fetch/ write, S7 communication (server) PROFINET IO device integrated 2-port switch ERTEC 200, module replacement without PG, SNMP diagnostics, initialization via LAN,
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET CP 343-1 based on 6GK7343-1EX30-0XE0 with conformal coating, -25…+70 °C, communications processor for connection of SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO controller or PROFINET IO device, integrated 2-port switch ERTEC 200 S7 communication, fetch/write, send/receive with and without RFC1006, multicast DHCP, NTC-CPU sync, diagnostics, initialization via LAN,
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET CP 343-1 Advanced based on 6GK7343-1GX31-0XE0 with conformal coating, 0…+60 °C, for connection of the SIMATIC S7-300 CPU to Ind. Ethernet; PROFINET IO controller and/or IO Device RT and RT and IRT IRT, MRP, PROFINET CBA; TCP/IP ISO, UDP, S7 communication, S5-compatible communication, (send/receive) with fetch/write with and without RFC 1006, multicast diagnostics extension,SNMP,DHCP, FTP client/server, email, Gigabit-SS1X RJ45 (10/100/1000); PROFINET interface 2x RJ45(10/100 Mbit) PROFINET CBA; security
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 FM350-1 based on 6ES7350-1AH03-0AE0 with conformal coating, -25…+60 °C, counter module counter functions up to 500 kHz 1 channel for connection of 5 V and 24 V incremental encoders isochronous mode; measuring range types incl. configuration package on CD-ROM
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 FM350-2 8 channels based on 6ES7350-2AH01-0AE0 with conformal coating, 0…+60 °C, counter module FM 350-2, 8 channels, 20 kHz, 24 V encoder for counting, frequency measurement, speed measurement, cycle duration measurement, dosing incl. configuration package and electronic documentation on CD-ROM
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 IM 365 based on 6ES7365-0BA01-0AA0 with conformal coating, -25…+60 °C, connection IM 365 for connection of an extension rack, without communications bus, 2 modules+ connecting cable 1 m
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS S7-300 DM370 based on 6ES7370-0AA01-0AA0 with conformal coating, -40…+70 °C, dummy module use for module replacement
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET TIM 3V-IE based on 6NH7800-3BA00 with conformal coating, -25…+70 °C, communications module for SIMATIC S7-300 and C7; with one RS-232 interface for SINAUT communication via a classic wide area network and an RJ45 interface for SINAUT communication via an IP-based network (WAN or LAN)
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET TIM 4R-IE based on 6NH7800-4BA00 with conformal coating, -25…+70 °C, communications module for SIMATIC S7-300, S7-400, C7, PC with two RS-232/RS-485 interfaces for SINAUT communication via classic wide area networks and two RJ45 interfaces for SINAUT communication via IP-based networks (WAN or LAN)
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET TIM 3V-IE DNP3 based on 6NH7803-3BA00-0AA0 with conformal coating, -25…+70 °C, communications module for SIMATIC S7-300 with an RS232 interface
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIPLUS NET TIM 4R-IE DNP3 based on 6NH7803-4BA00-0AA0 with conformal coating, -25…+70 °C, TIM 4R-IE DNP3 communications module for SIMATIC S7-300, S7-400, PC; with two RS 232/RS 485 interfaces for DNP3 communication via classic wide area networks and two RJ45 interfaces for DNP3 communication via IP- based networks (WAN or LAN)
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIMATIC S7-300, mounting adapter for snapping the PS307 onto DIN rail 35x15/7.5 mm suitable for 6ES7307-1BA01-_, -1EA01-_, -1KA02-_ and higher
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIMATIC DP, connection IM 153-1, for ET 200M, for max. 8 S7-300 modules
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIMATIC DP, interface DP/PA-Link and ET200M IM153-2 HF for extended temperature range for max. 12 S7-300 modules with redundancy capability, Timestamping suitable for isochronous mode New features: up to 12 modules can be used Slave Initiative for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals / slot +++ Observe compatibility instructions in manual +++
- Product series S7-300
SIMATIC DP, connection ET 200M IM 153-4 PN IO for max. 12 S7-300 modules, extended functions: isochronous real time communication class 1 and 2, module exchange without PG, operation without MMC, maintenance support of new IO modules
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300
SIMATIC DP, connection ET 200M IM 153-4 PN IO High Feature for max. 12 S7-300 modules, supports fail-safe modules, HART modules, shared device, medium redundancy protocol
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
- Product series S7-300