6ES7153-4BA00-0XB0

Siemens 6ES7153-4BA00-0XB0

SIMATIC DP, connection ET 200M IM 153-4 PN IO High Feature for max. 12 S7-300 modules, supports fail-safe modules, HART modules, shared device, medium redundancy protocol

Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.

Product category
Interface modules (ET 200M)
Manufacturer
SIEMENS
Product series
S7-300
General information
Product type designationIM 153-4 PN HF
Vendor identification (VendorID)002AH
Device identifier (DeviceID)0302H
Supply voltage
Rated value (DC)24 V
permissible range, lower limit (DC)20.4 V
permissible range, upper limit (DC)28.8 V
external protection for power supply lines (recommendation)In a construction with grounded reference potential, a fuse is necessary for redundant interface modules (Recommendation: 2.5 A)
Mains buffering
Mains/voltage failure stored energy time5 ms
Input current
Current consumption, max.600 mA; with 24 V DC supply
Inrush current, typ.4 A
I²t0.09 A²·s
Output voltage
Rated value (DC)5 V
Output current
for backplane bus (5 V DC), max.1.5 A
Power loss
Power loss, typ.6 W
Address area
Address space per module
Inputs672 byte; Extended HART user data
Outputs192 byte
Hardware configuration
number of modules per DP device interface, max.12
1. Interface
PROFINET IO Device
Services
IRTYes
PROFIenergyNo
Prioritized startupYes
Shared deviceYes
Number of IO Controllers with shared device, max.2
Protocols
Bus protocol/transmission protocolPROFINET IO
Protocols (Ethernet)
TCP/IPYes
SNMPYes
LLDPYes
pingYes
ARPYes
Redundancy mode
PROFINET system redundancy (S2)Yes; on S7-400H
Media redundancy
MRPYes
Interrupts/diagnostics/status information
Diagnostics indication LED
LINK LEDYes; green LED
RX/TX LEDYes; Yellow LED
for module diagnosticsYes
Potential separation
Potential separation existsYes; Only direction PROFINET, RWB is not separated
Isolation
Isolation tested withBetween PROFINET and 24 V supply: 1 500 V AC, between functional grounding and 24 V supply: 500 V DC
Degree and class of protection
IP degree of protectionIP20
Ambient conditions
Ambient temperature during operation
min.0 °C
max.60 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.2 000 m
Dimensions
Width40 mm
Height125 mm
Depth118 mm
Weights
Weight, approx.215 g
Approvals / Certificates