6ES7153-1AA03-0XB0
SIMATIC DP, connection IM 153-1, for ET 200M, for max. 8 S7-300 modules
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
Product category
Interface modules (ET 200M)Manufacturer
SIEMENSProduct series
S7-300| General information | |
|---|---|
| Product type designation | IM 153-1 DP ST |
| Vendor identification (VendorID) | 801Dh |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| external protection for power supply lines (recommendation) | not necessary |
| Mains buffering | |
| Mains/voltage failure stored energy time | 5 ms |
| Input current | |
| Current consumption, max. | 350 mA; At 24 V DC |
| Inrush current, typ. | 2.5 A |
| I²t | 0.1 A²·s |
| Output voltage | |
| Rated value (DC) | 5 V |
| Output current | |
| for backplane bus (5 V DC), max. | 1 A |
| Power loss | |
| Power loss, typ. | 3 W |
| Address area | |
| Address space per module | |
| Inputs | 128 byte |
| Outputs | 128 byte |
| Hardware configuration | |
| number of modules per DP device interface, max. | 8 |
| Interfaces | |
| Transmission procedure | RS 485 |
| Transmission rate, max. | 12 Mbit/s |
| 1. Interface | |
| automatic detection of transmission rate | Yes |
| Interface types | |
| Output current of the interface, max. | 90 mA |
| Design of the connection | 9-pin sub D socket |
| PROFIBUS DP device | |
| GSD file | (for DPV1) SIEM801D.GSD; SI01801D.GSG |
| automatic baud rate search | Yes |
| Protocols | |
| Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 |
| Protocols (Ethernet) | |
| TCP/IP | No |
| PROFIBUS DP | |
| Number of node addresses, max. | 1 to 125 permitted |
| Services | |
| SYNC capability | Yes |
| FREEZE capability | Yes |
| Direct data exchange (slave-to-slave communication) | Yes; Sender |
| Potential separation | |
| Potential separation exists | Yes |
| Isolation | |
| Isolation tested with | Isolation voltage 500 V |
| Degree and class of protection | |
| IP degree of protection | IP20 |
| Ambient conditions | |
| Ambient temperature during operation | |
| min. | 0 °C |
| max. | 60 °C |
| horizontal installation, min. | 0 °C |
| horizontal installation, max. | 60 °C |
| vertical installation, min. | 0 °C |
| vertical installation, max. | 40 °C |
| Altitude during operation relating to sea level | |
| Installation altitude above sea level, max. | 3 000 m |
| Configuration | |
| Configuration software | |
| STEP 7 | STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file |
| Dimensions | |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 117 mm |
| Weights | |
| Weight, approx. | 360 g |
| Approvals / Certificates | |