6ES7153-4AA01-0XB0
SIMATIC DP, connection ET 200M IM 153-4 PN IO for max. 12 S7-300 modules, extended functions: isochronous real time communication class 1 and 2, module exchange without PG, operation without MMC, maintenance support of new IO modules
Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.
Kategória produktu
Rozhrania (ET 200M)Výrobca
SIEMENSProduktový rad
S7-300| General information | |
|---|---|
| Product type designation | IM 153-4 PN ST |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0302H |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| external protection for power supply lines (recommendation) | In a construction with grounded reference potential, a fuse is necessary for redundant interface modules (Recommendation: 2.5 A) |
| Mains buffering | |
| Mains/voltage failure stored energy time | 5 ms |
| Input current | |
| Current consumption, max. | 600 mA; with 24 V DC supply |
| Inrush current, typ. | 4 A |
| I²t | 0.09 A²·s |
| Output voltage | |
| Rated value (DC) | 5 V |
| Output current | |
| for backplane bus (5 V DC), max. | 1.5 A |
| Power loss | |
| Power loss, typ. | 6 W |
| Address area | |
| Address space per module | |
| Inputs | 192 byte |
| Outputs | 192 byte |
| Hardware configuration | |
| number of modules per DP device interface, max. | 12 |
| Protocols | |
| Bus protocol/transmission protocol | PROFINET IO |
| Protocols (Ethernet) | |
| TCP/IP | No |
| Redundancy mode | |
| PROFINET system redundancy (S2) | No |
| Media redundancy | |
| MRP | Yes |
| Interrupts/diagnostics/status information | |
| Diagnostics indication LED | |
| LINK LED | Yes; green LED |
| RX/TX LED | Yes; Yellow LED |
| for module diagnostics | Yes |
| Potential separation | |
| Potential separation exists | Yes |
| Isolation | |
| Isolation tested with | 500 V DC |
| Degree and class of protection | |
| IP degree of protection | IP20 |
| Ambient conditions | |
| Ambient temperature during operation | |
| min. | 0 °C |
| max. | 60 °C |
| Altitude during operation relating to sea level | |
| Installation altitude above sea level, max. | 2 000 m |
| Dimensions | |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 118 mm |
| Weights | |
| Weight, approx. | 215 g |
| Approvals / Certificates | |