i950

i950-C0.37/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 0.37 kW/0.5 HP
Output current 2.4 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C0.55/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 0.55 kW/0.75 HP
Output current 3.2 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C0.55/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 0.55 kW/0.75 HP
Output current 1.8/1.6 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C0.75/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 0.75 kW/1 HP
Output current 4.2 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C0.75/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 0.75 kW/1 HP
Output current 2.4/2.1 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C1.5/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 1.5 kW/2 HP
Output current 7 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C2.2/230-3 Description
Lenze logo

Order code / SKU

On request

Rated power 2.2 kW/3 HP
Output current 9.6 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C2.2/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 2.2 kW/3 HP
Output current 5.6/4.8 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C4/230-3 Description
Lenze logo

Order code / SKU

On request

Rated power 4 kW/5 HP
Output current 16.5 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C4/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 4 kW/5 HP
Output current 9.5/8.2 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C5.5/230-3 Description
Lenze logo

Order code / SKU

On request

Rated power 5.5 kW/7.5 HP
Output current 23 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C7.5/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 7.5 kW/10 HP
Output current 16.5/14 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C11/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 11 kW/15 HP
Output current 23.5/21 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C15/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 15 kW/20 HP
Output current 32/27 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C22/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 22 kW/30 HP
Output current 47/40.4 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C30/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 30 kW/40 HP
Output current 61/52 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C45/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 45 kW/60 HP
Output current 89/77 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C55/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 55 kW/75 HP
Output current 110/96 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C75/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 75 kW/100 HP
Output current 150/124 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C90/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 90 kW/125 HP
Output current 180/156 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C110/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 110 kW/150 HP
Output current 212/180 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

Error code Manufacturer Product category Keypad display

Showing 201–225 of 563

Fault message ID
704708510 0x2A00FF9E Description

PDSS - Creep velocity SCS exceeded
Cause

The drive has exceeded the currently permitted SCS creeping speed.
Remedy

Check parameters for PDSS. Reduce speeds in the application. Increase distance to PDSS limit values.
Severity/response

Warning
Fault message ID
704708511 0x2A00FF9F Description

PDSS - No diagnostic mark detected
Cause

No diagnostic marker for PDSS was detected.
Remedy

Adapt parameters for the diagnostic marker. Check the function of the diagnostic sensors. Correct position of the diagnostic sensors.
Severity/response

Warning
Fault message ID
704708512 0x2A00FFA0 Description

PDSS - Diagnostic mark detected at invalid position
Cause

A diagnostic marker for PDSS was detected at an invalid position.
Remedy

Adapt parameters for the diagnostic marker. Correct position of the diagnostic sensors.
Severity/response

Warning
Fault message ID
704708518 0x2A00FFA6 Description

SHom - Time-out
Cause

After SHom_Start, the home position was not detected within the timeout set in 0x2882:002.
Remedy

Adapt timeout. Check configuration of triggers for SHom_Start and SHom_Load.
Severity/response

Warning
Fault message ID
704708519 0x2A00FFA7 Description

SHom - Home position deleted
Cause

The home position was deleted by acknowledging a position error or manually via 0x2114:014.
Remedy

Execute SHom again.
Severity/response

Information
Fault message ID
704708520 0x2A00FFA8 Description

SHom - Maximum slip value exceeded
Cause

The maximum permissible slip has been exceeded.
Remedy

Evaluate slip monitoring in 0x2870:2. Check the wear-prone drive components and replace then if necessary.
Severity/response

Warning
Fault message ID
704708521 0x2A00FFA9 Description

SHom - Tolerance of start position exceeded
Cause

The tolerance for the starting position has been exceeded.
Remedy

Do not move drive components while the mains voltage is switched off. Execute SHom again.
Severity/response

Warning
Fault message ID
704708522 0x2A00FFAA Description

SHom - Tolerance of position comparison exceeded
Cause

The tolerance for the position comparison has been exceeded.
Remedy

Check gearbox factor and mounting direction. Check the wear-prone drive components and replace then if necessary. Execute SHom again.
Severity/response

Warning
Fault message ID
704708523 0x2A00FFAB Description

SSM - Invalid safe velocity
Cause

No safe speed could be determined. The encoder is not initialized or the status transmitted by the encoder is invalid.
Remedy

Check encoder. A certified motor/encoder combination must be used.
Severity/response

Warning
Fault message ID
704708524 0x2A00FFAC Description

SSM - Encoder error
Cause

The monitoring of the safe speed via encoder is faulty.
Remedy

Check encoder. Check configuration of the encoder.
Severity/response

Warning
Fault message ID
704708525 0x2A00FFAD Description

SSM - Resolver error
Cause

The monitoring of the safe speed via resolver is faulty.
Remedy

Check encoder. Check configuration of the encoder.
Severity/response

Warning
Fault message ID
704708526 0x2A00FFAE Description

SSM - Error in standard device data
Cause

Safe speed monitoring is faulty because the device is transmitting incorrect data.
Remedy

Check encoder. Check configuration of the encoder.
Severity/response

Warning
Fault message ID
704708527 0x2A00FFAF Description

SSM - Speed deviation too high
Cause

The difference between the internally calculated speed and the speed transmitted by the encoder is too large.
Remedy

Check configuration of the encoder. Check gearbox factor. Check tolerance for the deviation.
Severity/response

Warning
Fault message ID
704708528 0x2A00FFB0 Description

SSM - Synchronization error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning
Fault message ID
704708529 0x2A00FFB1 Description

MUT - Muting function active
Cause

MUT - Muting function active
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
704708530 0x2A00FFB2 Description

MUT - Muting function completed
Cause

MUT - Muting function completed
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
704708531 0x2A00FFB3 Description

MUT - Muting function aborted
Cause

Communication error. The muting function was canceled.
Remedy

Reconnect to the device. Restart the muting function.
Severity/response

Information
Fault message ID
704708536 0x2A00FFB8 Description

HDSL encoder - ID was set
Cause

The encoder ID of the connected HIPERFACE DSL® encoder has been set to the correct value. The error Different encoder ID has been fixed. The status bit has been reset: 0x2878:050, bit 13
Remedy

Check whether the encoder-axis assignment is now correct.
Severity/response

Information
Fault message ID
805306384 0x30000010 Description

Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning
Fault message ID
805306385 0x30000011 Description

Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning
Fault message ID
805306386 0x30000012 Description

Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning
Fault message ID
805306387 0x30000013 Description

Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning
Fault message ID
805306570 0x300000CA Description

Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning
Fault message ID
805306571 0x300000CB Description

Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning
Fault message ID
805311368 0x30001388 Description

Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, contact the manufacturer.
Severity/response

Warning

Parameter code Name Display code Manufacturer Product category Fieldbus

0x2304:021 Parameter
CANopen settings: Communication error Data type
U8 Default setting
Status -> Pre-operational [0] Attributes
-
0x2304:031 Parameter
CANopen settings: COB-ID client -> server (rx) Data type
U32 Default setting
0x80000641 Attributes
H
0x2304:032 Parameter
CANopen settings: COB-ID server -> client (tx) Data type
U32 Default setting
0x800005C1 Attributes
H
0x2304:033 Parameter
CANopen settings: SDO client - Node-ID Data type
U8 Default setting
1 Attributes
-
0x2304:041 Parameter
CANopen settings: RPDO1 - COB-ID Data type
U32 Default setting
0x00000201 Attributes
H
0x2304:042 Parameter
CANopen settings: RPDO1 - Transmission type Data type
U8 Default setting
255 Attributes
-
0x2304:045 Parameter
CANopen settings: RPDO1 - Event timer Data type
U16 Default setting
100 ms Attributes
-
0x2304:051 Parameter
CANopen settings: RPDO2 - COB-ID Data type
U32 Default setting
0x80000301 Attributes
H
0x2304:052 Parameter
CANopen settings: RPDO2 - Transmission type Data type
U8 Default setting
255 Attributes
-
0x2304:055 Parameter
CANopen settings: RPDO2 - Event timer Data type
U16 Default setting
100 ms Attributes
-
0x2304:061 Parameter
CANopen settings: RPDO3 - COB-ID Data type
U32 Default setting
0x80000401 Attributes
H
0x2304:062 Parameter
CANopen settings: RPDO3 - Transmission type Data type
U8 Default setting
255 Attributes
-
0x2304:065 Parameter
CANopen settings: RPDO3 - Event timer Data type
U16 Default setting
100 ms Attributes
-
0x2304:071 Parameter
CANopen settings: RPDO4 - COB-ID Data type
U32 Default setting
0x80000501 Attributes
H
0x2304:072 Parameter
CANopen settings: RPDO4 - Transmission type Data type
U8 Default setting
255 Attributes
-
0x2304:075 Parameter
CANopen settings: RPDO4 - Event timer Data type
U16 Default setting
100 ms Attributes
-
0x2304:081 Parameter
CANopen settings: TPDO1 - COB-ID Data type
U32 Default setting
0x40000181 Attributes
H
0x2304:082 Parameter
CANopen settings: TPDO1 - Transmission type Data type
U8 Default setting
255 Attributes
-
0x2304:083 Parameter
CANopen settings: TPDO1 - Inhibit time Data type
U16 Default setting
0.0 ms Attributes
-
0x2304:085 Parameter
CANopen settings: TPDO1 - Event timer Data type
U16 Default setting
20 ms Attributes
-
0x2304:091 Parameter
CANopen settings: TPDO2 - COB-ID Data type
U32 Default setting
0xC0000281 Attributes
H
0x2304:092 Parameter
CANopen settings: TPDO2 - Transmission type Data type
U8 Default setting
255 Attributes
-
0x2304:093 Parameter
CANopen settings: TPDO2 - Inhibit time Data type
U16 Default setting
0.0 ms Attributes
-
0x2304:095 Parameter
CANopen settings: TPDO2 - Event timer Data type
U16 Default setting
0 ms Attributes
-
0x2304:101 Parameter
CANopen settings: TPDO3 - COB-ID Data type
U32 Default setting
0xC0000381 Attributes
H

No results.