fabrika.digital
EnglishEnglish

i950

i950-C0.37/230-2 i950-C0.37/230-2 Description
 Lenze logo Order code / SKU
On request
  • Rated power 0.37 kW/0.5 HP
  • Output current 2.4 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 1/N(3)/PE 230/240 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter not integrated
i950-C0.55/230-2 i950-C0.55/230-2 Description
 Lenze logo Order code / SKU
On request
  • Rated power 0.55 kW/0.75 HP
  • Output current 3.2 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 1/N(3)/PE 230/240 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter not integrated
i950-C0.55/400-3 i950-C0.55/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 0.55 kW/0.75 HP
  • Output current 1.8/1.6 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C0.75/230-2 i950-C0.75/230-2 Description
 Lenze logo Order code / SKU
On request
  • Rated power 0.75 kW/1 HP
  • Output current 4.2 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 1/N(3)/PE 230/240 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter not integrated
i950-C0.75/400-3 i950-C0.75/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 0.75 kW/1 HP
  • Output current 2.4/2.1 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C1.5/230-2 i950-C1.5/230-2 Description
 Lenze logo Order code / SKU
On request
  • Rated power 1.5 kW/2 HP
  • Output current 7 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 1/N(3)/PE 230/240 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter not integrated
i950-C2.2/230-3 i950-C2.2/230-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 2.2 kW/3 HP
  • Output current 9.6 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 230/240 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter not integrated
i950-C2.2/400-3 i950-C2.2/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 2.2 kW/3 HP
  • Output current 5.6/4.8 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C4/230-3 i950-C4/230-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 4 kW/5 HP
  • Output current 16.5 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 230/240 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter not integrated
i950-C4/400-3 i950-C4/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 4 kW/5 HP
  • Output current 9.5/8.2 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C5.5/230-3 i950-C5.5/230-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 5.5 kW/7.5 HP
  • Output current 23 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 230/240 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter not integrated
i950-C7.5/400-3 i950-C7.5/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 7.5 kW/10 HP
  • Output current 16.5/14 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C11/400-3 i950-C11/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 11 kW/15 HP
  • Output current 23.5/21 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C15/400-3 i950-C15/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 15 kW/20 HP
  • Output current 32/27 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C22/400-3 i950-C22/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 22 kW/30 HP
  • Output current 47/40.4 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C30/400-3 i950-C30/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 30 kW/40 HP
  • Output current 61/52 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C45/400-3 i950-C45/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 45 kW/60 HP
  • Output current 89/77 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C55/400-3 i950-C55/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 55 kW/75 HP
  • Output current 110/96 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C75/400-3 i950-C75/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 75 kW/100 HP
  • Output current 150/124 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C90/400-3 i950-C90/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 90 kW/125 HP
  • Output current 180/156 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
i950-C110/400-3 i950-C110/400-3 Description
 Lenze logo Order code / SKU
On request
  • Rated power 110 kW/150 HP
  • Output current 212/180 A
  • Output frequency 0-599 Hz
  • Rated mains voltage 3/PE 400/480 V AC
  • Motor output Single axis
  • Generation B
  • Product series i950 cabinet
  • EMC filter Integrated
Showing 201–225 of 563
  • Fault message ID
    704708510     0x2A00FF9E Description

    PDSS - Creep velocity SCS exceeded

     Cause

    The drive has exceeded the currently permitted SCS creeping speed.

     Remedy

    Check parameters for PDSS. Reduce speeds in the application. Increase distance to PDSS limit values.

     Severity/response

    Warning
  • Fault message ID
    704708511     0x2A00FF9F Description

    PDSS - No diagnostic mark detected

     Cause

    No diagnostic marker for PDSS was detected.

     Remedy

    Adapt parameters for the diagnostic marker. Check the function of the diagnostic sensors. Correct position of the diagnostic sensors.

     Severity/response

    Warning
  • Fault message ID
    704708512     0x2A00FFA0 Description

    PDSS - Diagnostic mark detected at invalid position

     Cause

    A diagnostic marker for PDSS was detected at an invalid position.

     Remedy

    Adapt parameters for the diagnostic marker. Correct position of the diagnostic sensors.

     Severity/response

    Warning
  • Fault message ID
    704708518     0x2A00FFA6 Description

    SHom - Time-out

     Cause

    After SHom_Start, the home position was not detected within the timeout set in 0x2882:002.

     Remedy

    Adapt timeout. Check configuration of triggers for SHom_Start and SHom_Load.

     Severity/response

    Warning
  • Fault message ID
    704708519     0x2A00FFA7 Description

    SHom - Home position deleted

     Cause

    The home position was deleted by acknowledging a position error or manually via 0x2114:014.

     Remedy

    Execute SHom again.

     Severity/response

    Information
  • Fault message ID
    704708520     0x2A00FFA8 Description

    SHom - Maximum slip value exceeded

     Cause

    The maximum permissible slip has been exceeded.

     Remedy

    Evaluate slip monitoring in 0x2870:2. Check the wear-prone drive components and replace then if necessary.

     Severity/response

    Warning
  • Fault message ID
    704708521     0x2A00FFA9 Description

    SHom - Tolerance of start position exceeded

     Cause

    The tolerance for the starting position has been exceeded.

     Remedy

    Do not move drive components while the mains voltage is switched off. Execute SHom again.

     Severity/response

    Warning
  • Fault message ID
    704708522     0x2A00FFAA Description

    SHom - Tolerance of position comparison exceeded

     Cause

    The tolerance for the position comparison has been exceeded.

     Remedy

    Check gearbox factor and mounting direction. Check the wear-prone drive components and replace then if necessary. Execute SHom again.

     Severity/response

    Warning
  • Fault message ID
    704708523     0x2A00FFAB Description

    SSM - Invalid safe velocity

     Cause

    No safe speed could be determined. The encoder is not initialized or the status transmitted by the encoder is invalid.

     Remedy

    Check encoder. A certified motor/encoder combination must be used.

     Severity/response

    Warning
  • Fault message ID
    704708524     0x2A00FFAC Description

    SSM - Encoder error

     Cause

    The monitoring of the safe speed via encoder is faulty.

     Remedy

    Check encoder. Check configuration of the encoder.

     Severity/response

    Warning
  • Fault message ID
    704708525     0x2A00FFAD Description

    SSM - Resolver error

     Cause

    The monitoring of the safe speed via resolver is faulty.

     Remedy

    Check encoder. Check configuration of the encoder.

     Severity/response

    Warning
  • Fault message ID
    704708526     0x2A00FFAE Description

    SSM - Error in standard device data

     Cause

    Safe speed monitoring is faulty because the device is transmitting incorrect data.

     Remedy

    Check encoder. Check configuration of the encoder.

     Severity/response

    Warning
  • Fault message ID
    704708527     0x2A00FFAF Description

    SSM - Speed deviation too high

     Cause

    The difference between the internally calculated speed and the speed transmitted by the encoder is too large.

     Remedy

    Check configuration of the encoder. Check gearbox factor. Check tolerance for the deviation.

     Severity/response

    Warning
  • Fault message ID
    704708528     0x2A00FFB0 Description

    SSM - Synchronization error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
  • Fault message ID
    704708529     0x2A00FFB1 Description

    MUT - Muting function active

     Cause

    MUT - Muting function active

     Remedy

    For information only. No remedy necessary.

     Severity/response

    Information
  • Fault message ID
    704708530     0x2A00FFB2 Description

    MUT - Muting function completed

     Cause

    MUT - Muting function completed

     Remedy

    For information only. No remedy necessary.

     Severity/response

    Information
  • Fault message ID
    704708531     0x2A00FFB3 Description

    MUT - Muting function aborted

     Cause

    Communication error. The muting function was canceled.

     Remedy

    Reconnect to the device. Restart the muting function.

     Severity/response

    Information
  • Fault message ID
    704708536     0x2A00FFB8 Description

    HDSL encoder - ID was set

     Cause

    The encoder ID of the connected HIPERFACE DSL® encoder has been set to the correct value. The error Different encoder ID has been fixed. The status bit has been reset: 0x2878:050, bit 13

     Remedy

    Check whether the encoder-axis assignment is now correct.

     Severity/response

    Information
  • Fault message ID
    805306384     0x30000010 Description

    Internal error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
  • Fault message ID
    805306385     0x30000011 Description

    Internal error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
  • Fault message ID
    805306386     0x30000012 Description

    Internal error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
  • Fault message ID
    805306387     0x30000013 Description

    Internal error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
  • Fault message ID
    805306570     0x300000CA Description

    Internal error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
  • Fault message ID
    805306571     0x300000CB Description

    Internal error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
  • Fault message ID
    805311368     0x30001388 Description

    Internal error

     Cause

    Internal error

     Remedy

    Restart the device. If the error persists, contact the manufacturer.

     Severity/response

    Warning
← Previous Page 9 of 23 Next →

No results.