i950

i950-C0.37/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 0.37 kW/0.5 HP
Output current 2.4 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C0.55/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 0.55 kW/0.75 HP
Output current 3.2 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C0.55/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 0.55 kW/0.75 HP
Output current 1.8/1.6 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C0.75/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 0.75 kW/1 HP
Output current 4.2 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C0.75/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 0.75 kW/1 HP
Output current 2.4/2.1 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C1.5/230-2 Description
Lenze logo

Order code / SKU

On request

Rated power 1.5 kW/2 HP
Output current 7 A
Output frequency 0-599 Hz
Rated mains voltage 1/N(3)/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C2.2/230-3 Description
Lenze logo

Order code / SKU

On request

Rated power 2.2 kW/3 HP
Output current 9.6 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C2.2/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 2.2 kW/3 HP
Output current 5.6/4.8 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C4/230-3 Description
Lenze logo

Order code / SKU

On request

Rated power 4 kW/5 HP
Output current 16.5 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C4/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 4 kW/5 HP
Output current 9.5/8.2 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C5.5/230-3 Description
Lenze logo

Order code / SKU

On request

Rated power 5.5 kW/7.5 HP
Output current 23 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 230/240 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter not integrated

i950-C7.5/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 7.5 kW/10 HP
Output current 16.5/14 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C11/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 11 kW/15 HP
Output current 23.5/21 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C15/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 15 kW/20 HP
Output current 32/27 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C22/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 22 kW/30 HP
Output current 47/40.4 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C30/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 30 kW/40 HP
Output current 61/52 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C45/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 45 kW/60 HP
Output current 89/77 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C55/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 55 kW/75 HP
Output current 110/96 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C75/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 75 kW/100 HP
Output current 150/124 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C90/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 90 kW/125 HP
Output current 180/156 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

i950-C110/400-3 Description
Lenze logo

Order code / SKU

On request

Rated power 110 kW/150 HP
Output current 212/180 A
Output frequency 0-599 Hz
Rated mains voltage 3/PE 400/480 V AC
Motor output Single axis
Generation B
Product series i950 cabinet
EMC filter Integrated

Error code Manufacturer Product category Keypad display

Showing 76–100 of 563

Fault message ID
671158529 0x28011101 Description

Initialization - Parameter value could not be written
Cause

Initialization - Parameter value could not be written
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671158530 0x28011102 Description

Load default setting - Parameter value could not be written
Cause

Write access denied with corresponding error message.
Remedy

Evaluate parameter value based on the error message in the logbook. Correct parameter value accordingly.
Severity/response

Warning
Fault message ID
671158785 0x28011201 Description

Parameters - Initialization failed
Cause

Not all parameters could be initialized.
Remedy

See related entries in the logbook.
Severity/response

Warning
Fault message ID
671158786 0x28011202 Description

Parameters - Loading default values failed
Cause

Not all presets could be written.
Remedy

See related entries in the logbook.
Severity/response

Warning
Fault message ID
671158787 0x28011203 Description

Parameters - Loading TA default values failed
Cause

Not all presets of the technology application could be written.
Remedy

See related entries in the logbook.
Severity/response

Warning
Fault message ID
671159298 0x28011402 Description

Opening the parameter description failed
Cause

Parameter description is missing or faulty.
Remedy

Update boot project or device firmware.
Severity/response

Fault
Fault message ID
671159299 0x28011403 Description

Opening the parameter set failed
Cause

Parameter set file is missing or faulty.
Remedy

Update boot project or restart device.
Severity/response

Fault
Fault message ID
671219713 0x28020001 Description

Logbook: Corrupt restore data
Cause

Logbook: Corrupt restore data
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671219773 0x2802003D Description

Logbook cleared
Cause

Logbook cleared
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671219776 0x28020040 Description

Logbook: Timeout restoring data
Cause

Logbook: Timeout restoring data
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671219777 0x28020041 Description

Logbook: Error restoring data
Cause

Logbook: Error restoring data
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671219778 0x28020042 Description

First boot with this firmware version
Cause

First boot with this firmware version
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671219779 0x28020043 Description

Logbook was restored.
Cause

Logbook was restored.
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671219780 0x28020044 Description

Logbook: Error reading persistent data.
Cause

Logbook: Error reading persistent data.
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671263317 0x2802AA55 Description

The chronology of the logbook is not consistent
Cause

The chronology of the logbook is not consistent
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671354881 0x28041001 Description

CmpLenzeErrorManagementAccess loaded without errors
Cause

CmpLenzeErrorManagementAccess loaded without errors
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
671420673 0x28051101 Description

Test-Mode - More Application Credit required, application is starting delayed
Cause

The "Application-Credit" is not sufficient for the application. The start of the application is delayed.
Remedy

Use SD card with sufficient "Application-Credit".
Severity/response

Warning
Fault message ID
671420674 0x28051102 Description

Application-Credit - Invalid license data
Cause

Faulty license data was detected when the "Application-Credit" was loaded.
Remedy

Use SD card with valid license data.
Severity/response

Warning
Fault message ID
671420675 0x28051103 Description

Application-Credit - License data missing
Cause

No license data was found on the SD card when then the "Application-Credit" was loaded.
Remedy

Use SD card with valid license data.
Severity/response

Warning
Fault message ID
671421185 0x28051301 Description

Boot application - More Application Credit required
Cause

The "Application-Credit" is not sufficient for the boot application. Booting is delayed.
Remedy

Use SD card with sufficient "Application-Credit".
Severity/response

Warning
Fault message ID
671809799 0x280B0107 Description

Application was downloaded.
Cause

Application was downloaded.
Remedy

For information only. No remedy necessary.
Severity/response

Information
Fault message ID
704663680 0x2A005080 Description

Internal error - AIS
Cause

Internal error
Remedy

Restart the device. If the error persists, replace the device.
Severity/response

Warning
Fault message ID
704663681 0x2A005081 Description

Internal error - AIE
Cause

Internal error
Remedy

Restart the device. If the error persists, replace the device.
Severity/response

Warning
Fault message ID
704663682 0x2A005082 Description

Internal error - Button S82
Cause

Internal error
Remedy

Restart the device. If the error persists, replace the device.
Severity/response

Warning
Fault message ID
704663683 0x2A005083 Description

IRS - Internal error
Cause

Internal error
Remedy

Restart the device. If the error persists, replace the device.
Severity/response

Warning

Parameter code Name Display code Manufacturer Product category Fieldbus

0x2C44:012 Parameter
Motor encoder identification (Resolver): Harmonic for cyclic online compensation Data type
U16 Default setting
22 Attributes
-
0x2C44:013 Parameter
Motor encoder identification (Resolver): Dead time compensation resolver evaluation Data type
I16 Default setting
100.0 % Attributes
-
0x2C45 Parameter
Motor feedback error response Data type
U8 Default setting
Fault > CiA402 [1] Attributes
-
0x2C46 Parameter
Number of the absolute ascertainable revolutions of motor encoder Data type
U16 Default setting
- (Read only) Attributes
-
0x2C47 Parameter
Open circuit detection sensitivity of motor encoder Data type
U8 Default setting
100 % Attributes
-
0x2C48:001 Parameter
Motor encoder (EnDat): Response communication error Data type
U8 Default setting
Fault > CiA402 [1] Attributes
-
0x2C48:002 Parameter
Motor encoder (EnDat): Actual position (raw data) Data type
U32 Default setting
- (Read only) Attributes
-
0x2C48:003 Parameter
Motor encoder (EnDat): Serial number Data type
STRING[50] Default setting
- (Read only) Attributes
-
0x2C48:004 Parameter
Motor encoder (EnDat): ID number Data type
STRING[50] Default setting
- (Read only) Attributes
-
0x2C48:005 Parameter
Motor encoder (EnDat): Encoder designation Data type
STRING[50] Default setting
- (Read only) Attributes
-
0x2C48:006 Parameter
Motor encoder (EnDat): EnDat ordering designation Data type
STRING[50] Default setting
- (Read only) Attributes
-
0x2C48:007 Parameter
Motor encoder (EnDat): EnDat command set Data type
STRING[50] Default setting
- (Read only) Attributes
-
0x2C48:008 Parameter
Motor encoder (EnDat): Encoder type Data type
U8 Default setting
- (Read only) Attributes
-
0x2C48:009 Parameter
Motor encoder (EnDat): Signal periods per revolution/Length of signal period Data type
U32 Default setting
- (Read only) Attributes
-
0x2C48:010 Parameter
Motor encoder (EnDat): Distinguishable revolutions Data type
U16 Default setting
- (Read only) Attributes
-
0x2C48:011 Parameter
Motor encoder (EnDat): Max. clock frequency Data type
U16 Default setting
x kHz (Read only) Attributes
-
0x2C48:012 Parameter
Motor encoder (EnDat): Measuring step or measuring steps/rev for serial data transmission Data type
U32 Default setting
- (Read only) Attributes
-
0x2C48:013 Parameter
Motor encoder (EnDat): Scaling factor for resolution Data type
U16 Default setting
- (Read only) Attributes
-
0x2C48:014 Parameter
Motor encoder (EnDat): Measuring step, or measuring steps/rev or subdivision values of a grating period Data type
U32 Default setting
- (Read only) Attributes
-
0x2C4A:001 Parameter
Motor encoder (SSI) protocol parameters: Bit rate Data type
U16 Default setting
300 kbps Attributes
C
0x2C4A:002 Parameter
Motor encoder (SSI) protocol parameters: Telegram length Data type
U8 Default setting
25 Attributes
C
0x2C4A:003 Parameter
Motor encoder (SSI) protocol parameters: Bits/ revolution Data type
U8 Default setting
13 Attributes
C
0x2C4A:004 Parameter
Motor encoder (SSI) protocol parameters: Position data start bit Data type
U8 Default setting
0 Attributes
C
0x2C4A:005 Parameter
Motor encoder (SSI) protocol parameters: Data package 1 start bit Data type
U8 Default setting
0 Attributes
C
0x2C4A:006 Parameter
Motor encoder (SSI) protocol parameters: Data package 2 start bit Data type
U8 Default setting
0 Attributes
C

No results.