6AG1326-1RF01-4AB0
SIPLUS S7-300 SM 326F DI8 NAMUR based on 6ES7326-1RF01-0AB0 with conformal coating, 0…+60 °C, digital input SM 326, 8 DI; 24 V DC, NAMUR, fail-safe NAMUR input for SIMATIC S7 F-systems, up to category 4 (EN 954-1)/ SIL3 (IEC 61508)/PLE (ISO 13849), 1x 40-pole
Product category
Digital modulesManufacturer
SIEMENSProduct series
S7-300| General information | |
|---|---|
| based on | 6ES7326-1RF01-0AB0 |
| Supply voltage | |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Input current | |
| from load voltage L+ (without load), max. | 160 mA |
| from backplane bus 5 V DC, max. | 90 mA |
| Encoder supply | |
| Number of outputs | 8 |
| Type of output voltage | 8.2 V DC |
| Power loss | |
| Power loss, typ. | 4.5 W |
| Digital inputs | |
| Number of digital inputs | 8 |
| Number of simultaneously controllable inputs | |
| all mounting positions | |
| up to 40 °C, max. | 8 |
| up to 60 °C, max. | 8 |
| Input voltage | |
| Type of input voltage | DC |
| Input current | |
| for signal "0", max. (permissible quiescent current) | 0.35 to 1.2 mA |
| for signal "1", typ. | 2.1 to 7 mA |
| Input delay (for rated value of input voltage) | |
| for NAMUR inputs | |
| at "0" to "1", max. | 1.2 to 3 ms |
| at "1" to "0", max. | 1.2 to 3 ms |
| Cable length | |
| shielded, max. | 200 m |
| unshielded, max. | 100 m |
| Interrupts/diagnostics/status information | |
| Alarms | |
| Diagnostic alarm | Yes; Parameterizable |
| Diagnostics indication LED | |
| Fail-safe operation | Yes |
| Group error SF (red) | Yes |
| Ex(i) characteristics | |
| Module for Ex(i) protection | Yes |
| maximum values for connecting terminals for gas group IIC | |
| Uo (no-load voltage), max. | 10 V |
| Io (short-circuit current), max. | 13.9 mA |
| Po (power output), max. | 33.1 mW |
| Co (permissible external capacity), max. | 3 µF |
| Lo (permissible external inductivity), max. | 80 mH |
| Um (voltage at non-intrinsically safe connecting terminals), max. | 60 V DC/30 V AC |
| Potential separation | |
| Potential separation digital inputs | |
| between the channels | Yes |
| between the channels and backplane bus | Yes |
| between the channels and the power supply of the electronics | Yes |
| Standards, approvals, certificates | |
| CE mark | Yes |
| Highest safety class achievable in safety mode | |
| acc. to EN 954 | Cat. 4 |
| Performance level according to ISO 13849-1 | PLe |
| SIL acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) |
| Ambient conditions | |
| Ambient temperature during operation | |
| min. | 0 °C; = Tmin |
| max. | 60 °C; = Tmax |
| Altitude during operation relating to sea level | |
| Installation altitude above sea level, max. | 2 000 m |
| Ambient air temperature-barometric pressure-altitude | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) |
| Relative humidity | |
| With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
| Resistance | |
| Use in stationary industrial systems | |
| to biologically active substances according to EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request |
| to chemically active substances according to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| to mechanically active substances according to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust, * |
| Use on ships/at sea | |
| to biologically active substances according to EN 60721-3-6 | Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request |
| to chemically active substances according to EN 60721-3-6 | Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| to mechanically active substances according to EN 60721-3-6 | Yes; Class 6S3 incl. sand, dust; * |
| Usage in industrial process technology | |
| Against chemically active substances acc. to EN 60654-4 | Yes; Class 3 (excluding trichlorethylene) |
| Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 | Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) |
| Remark | |
| Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 | * The supplied plug covers must remain in place over the unused interfaces during operation! |
| Connection method | |
| required front connector | 1x 40-pin |
| Dimensions | |
| Width | 80 mm |
| Height | 125 mm |
| Depth | 120 mm |
| Weights | |
| Weight, approx. | 482 g |
| Approvals / Certificates | |