fabrika.digital
EnglishEnglish

6NH7800-4BA00

Product category
Communication
Manufacturer
SIEMENS
Product series
S7-300
product type designationTIM 4R-IE
product brand nameSINAUT ST7
Technical Product Detail Pagehttps://i.siemens.com/1P6NH7800-4BA00
transfer rate
transfer rate
for Industrial Ethernet10 ... 100 Mbit/s
according to RS 23250 ... 38400 bit/s
interfaces
number of interfaces / according to Industrial Ethernet2
number of electrical connections
for external data transmission / according to RS 2322
for power supply1
type of electrical connection
of Industrial Ethernet interfaceRJ45 port
type of electrical connection
at interface 1 / for external data transmission9 pin Sub-D-connector, RS232 switchable to RS485
at interface 2 / for external data transmission9-pole D-sub connector, RS232 can be switched to RS485
for power supply2-pole plugable terminal block
design of the removable storage
C-PLUGYes
supply voltage, current consumption, power loss
type of voltage / of the supply voltageDC
supply voltage24 V
supply voltage20.4 ... 28.8 V
supply voltage / external / at DC / rated value24 V
supply voltage / external / at DC / rated value20.4 ... 28.8 V
consumed current
from backplane bus / at DC / at 24 V / maximum0.2 A
from external supply voltage / at DC / at 24 V / maximum0.17 A
power loss [W]4.6 W
product extension / optional / backup batteryYes
type of batteryLithium AA / 3.6 V / 2.3 Ah
backup current
typical100 µA
maximum160 µA
ambient conditions
ambient temperature
during operation0 ... 60 °C
during storage-40 ... +70 °C
during transport-40 ... +70 °C
relative humidity
at 25 °C / without condensation / during operation / maximum95 %
protection class IPIP20
design, dimensions and weights
module formatCompact module S7-300 double width
width80 mm
height125 mm
depth120 mm
net weight0.4 kg
product features, product functions, product components / general
number of units
noteNumber of TIM 4R‑IE per S7‑300/S7-400: multiple, number depends on the connection resources of the CPU
wire length
with RS 232 interface / maximum6 m
with RS 485 interface / maximum30 m
performance data / S7 communication
number of possible connections / for S7 communication
maximum64
with PG connections / maximum2
with OP connections / maximum62
service
SINAUT ST7 via S7 communicationYes
PG/OP communicationYes
performance data / multi-protocol mode
number of active connections / with multi-protocol mode128
performance data / telecontrol
suitability for use
node stationYes
substationYes
TIM control centerYes
protocol / is supported
DNP3No
SINAUT ST1 protocolYes
SINAUT ST7 protocolYes
product function / data buffering if connection is abortedYes; 56,000 data messages
storage capacity
of S7 CPU work memory / for TD7onCPU mode data blocks on CPU / required20 Kibyte
of S7 CPU work memory / for TD7onTIM mode data blocks on TIM / required0 Kibyte
noteTD7onCPU: at least 20 KB, actual requirement determined by data volume and functional scope TD7onTIM: 0 bytes in most favorable case
product feature / buffered message frame memoryYes
transmission format
for SINAUT ST1 protocol with polling / 11 bitYes
for SINAUT ST1 protocol with spontaneous / 10-bit or 11-bitYes
for SINAUT ST7 protocol with multi-master polling / 10-bitYes
for SINAUT ST7 protocol with polling or spontaneous / 10-bit or 11-bitYes
operating mode for scanning of data transmission
with dedicated line/radio link / with SINAUT ST1 protocolPolling, polling with time slot procedure
with dedicated line/radio link / with SINAUT ST7 protocolPolling, polling with time slot procedure, multi-master polling with time slot procedure
with dial-up network / with SINAUT ST1 protocolspontaneous
with dial-up network / with SINAUT ST7 protocolspontaneous
hamming distance
for SINAUT ST1 protocol4
for SINAUT ST7 protocol4
product functions / management, configuration, engineering
configuration software
requiredSINAUT ST7 ES
for CPU configuring / required / SINAUT TD7 block library for CPUYes
for PG configuring / required / SINAUT ST7 configuration software for PGYes
storage location / of TIM configuration dataon internal TIM flash memory, or on TIM in optional C‑PLUG, or on MMC of the S7-300 CPU if TIM installed in S7-300 controller
product function / is supported / identification linkYes; acc. to IEC 61406-1:2022
product functions / security
operating mode / Virtual Private Network (VPN)Yes
type of authentication / with Virtual Private Network / PSKYes
product function
password protection for VPNYes
MSC client via GPRS modem with MSC capabilityYes
protocol
is supported / MSC protocolYes
with Virtual Private Network MSC / is supportedTCP/IP
key length / for MSC / with Virtual Private Network128 bit
number of possible connections
as MSC client / with VPN connection1
as MSC server / with VPN connection128
product functions / time
product component / hardware real time clockYes
product feature / hardware real time clock w. battery backupYes
accuracy / of the hardware real time clock / per day / maximum4 s
time synchronization
from NTP-serverYes
standards, specifications, approvals
certificate of suitability / CE markingYes
certificate of suitability / UKCA markingYes
certificate of suitability / KC approvalYes
certificate of suitability / Regulatory Compliance Mark (RCM)Yes
certificate of suitability / RoHS conformityYes
standards, specifications, approvals / hazardous environments / header
certificate of suitability / ATEXYes
certificate of suitability / IECExYes
certificate of suitability / ULhazloc approvalYes
certificate of suitability / CCC / for hazardous zone according to GB standardYes
certificate of suitability / FM registrationYes
further information / internet links
internet link
to website: Selection guide for cables and connectorshttps://support.industry.siemens.com/cs/ww/en/view/109766358
to web page: selection aid TIA Selection Toolhttps://www.siemens.com/tstcloud
to website: Industrial communicationhttps://www.siemens.com/simatic-net
to web page: SiePortalhttps://sieportal.siemens.com/
to website: Image databasehttps://www.automation.siemens.com/bilddb
to website: CAx-Download-Managerhttps://siemens.com/cax
to website: Industry Online Supporthttps://support.industry.siemens.com
security information
security informationSiemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement - and continuously maintain - a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7)
Approvals / Certificates