6AG1541-1AD00-7AB0
SIPLUS S7-1500 CM PTP RS232 HF based on 6ES7541-1AD00-0AB0 with conformal coating, -40…+70 °C, start up -25 °C, communications module for serial connection RS-232, Freeport, 3964 (R), USS, MODBUS RTU master, slave, 115200 Kbit/s, 9-pin D-sub plug.
Product category
CommunicationManufacturer
SIEMENSProduct series
S7-1500| General information | |
|---|---|
| Product type designation | CM PtP RS 232 HF |
| based on | 6ES7541-1AD00-0AB0 |
| Product function | |
| I&M data | Yes; I&M 0 |
| Fast startup | Yes |
| Engineering with | |
| STEP 7 TIA Portal configurable/integrated from version | see entry ID: 109746275 |
| Installation type/mounting | |
| Rail mounting | Yes; S7-1500 mounting rail |
| Input current | |
| Current consumption (rated value) | 35 mA; From the backplane bus |
| Power | |
| Power consumption from the backplane bus | 0.65 W |
| Power loss | |
| Power loss, typ. | 0.6 W |
| Address area | |
| Address space per module | |
| Inputs | 8 byte |
| Interface types | |
| RS 232 | |
| Transmission rate, max. | 115.2 kbit/s |
| Cable length, max. | 15 m |
| RS 232 auxiliary signals | RTS, CTS, DTR, DSR, RI, DCD |
| Protocols | |
| Integrated protocols | |
| Freeport | |
| Telegram length, max. | 4 kbyte |
| Bits per character | 7 or 8 |
| Number of stop bits | 1 or 2 bit |
| Parity | None, even, odd, always 1, always 0, any |
| 3964 (R) | |
| Telegram length, max. | 4 kbyte |
| Bits per character | 7 or 8 |
| Number of stop bits | 1 or 2 bit |
| Parity | None, even, odd, always 1, always 0, any |
| Modbus RTU master | |
| Address area | 1 to 247, extended 1 to 65535 |
| max. number of devices | 1 |
| Modbus RTU device | |
| Address area | 1 to 247, extended 1 to 65535 |
| Telegram buffer | |
| Buffer memory for telegrams | 8 kbyte |
| Number of telegrams which can be buffered | 255 |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
| Diagnostic alarm | Yes |
| Hardware interrupt | No |
| Diagnoses | |
| Wire break | Yes |
| Diagnostics indication LED | |
| RUN LED | Yes; green LED |
| ERROR LED | Yes; red LED |
| Receive RxD | Yes; Yellow LED |
| Transmit TxD | Yes; Yellow LED |
| Potential separation | |
| between backplane bus and interface | Yes |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Ambient conditions | |
| Ambient temperature during operation | |
| horizontal installation, min. | -40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C |
| horizontal installation, max. | 70 °C |
| vertical installation, min. | -40 °C; = Tmin; Startup @ -25 °C |
| vertical installation, max. | 40 °C |
| Ambient temperature during storage/transportation | |
| min. | -40 °C |
| max. | 70 °C |
| Altitude during operation relating to sea level | |
| Installation altitude above sea level, max. | 5 000 m |
| Ambient air temperature-barometric pressure-altitude | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) |
| Relative humidity | |
| With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
| Resistance | |
| Coolants and lubricants | |
| Resistant to commercially available coolants and lubricants | Yes; Incl. diesel and oil droplets in the air |
| Use in stationary industrial systems | |
| to biologically active substances according to EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request |
| to chemically active substances according to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| to mechanically active substances according to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust, * |
| Use on ships/at sea | |
| to biologically active substances according to EN 60721-3-6 | Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request |
| to chemically active substances according to EN 60721-3-6 | Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| to mechanically active substances according to EN 60721-3-6 | Yes; Class 6S3 incl. sand, dust; * |
| Usage in industrial process technology | |
| Against chemically active substances acc. to EN 60654-4 | Yes; Class 3 (excluding trichlorethylene) |
| Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 | Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) |
| Remark | |
| Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 | * The supplied plug covers must remain in place over the unused interfaces during operation! |
| Conformal coating | |
| Coatings for printed circuit board assemblies acc. to EN 61086 | Yes; Class 2 for high reliability |
| Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection |
| Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life |
| Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A | Yes; Conformal coating, Class A |
| Decentralized operation | |
| to SIMATIC S7-300 | Yes |
| to SIMATIC S7-400 | Yes |
| to SIMATIC S7-1500 | Yes |
| to standard PROFINET controller | Yes |
| Dimensions | |
| Width | 35 mm |
| Height | 147 mm |
| Depth | 127 mm |
| Weights | |
| Weight, approx. | 0.22 kg |
| Approvals / Certificates | |