6ES7923-5BD00-0GB0
Connecting cable unshielded for SIMATIC S7-1500 64 I/O between I/O modul X10 or X11 and connection module 32 I/O 0.14 mm2, L = 3.0m, 1 pcs. 40 of 50 pole IDC connector.
Product category
Cables and connection modulesManufacturer
SIEMENSProduct series
S7-1500| Technical Product Detail Page | https://i.siemens.com/1P6ES7923-5BD00-0GB0 |
| target system | SIMATIC S7-1500 |
| suitability for use | Digital I/O modules |
| suitability for interaction | |
| input card PLC | Yes |
| PLC output card | Yes |
| suitability for use | |
| digital signal transmission | Yes |
| analog signal transmission | No |
| product brand name | SIMATIC Top connect |
| product type designation | Fully modular connection |
| product designation | Pre-assembled round cable |
| electrical data | |
|---|---|
| operating voltage / at DC | |
| rated value | 24 V |
| maximum | 60 V |
| connection method | |
| design of cable | Round cable |
| number of channels | 32 |
| wire length | 3 m |
| conductor cross section / rated value | 0.14 mm² |
| Product component / with shield | No |
| number of poles | 40 |
| at the 1st interface | 40; control page |
| at the 2nd interface | 50; on the connection module |
| connector type | IDC connector |
| type of electrical connection / on enclosure | Connector strip |
| type of electrical connection / in the field | Connector strip |
| standards, specifications, approvals | |
| certificate of suitability | |
| cULus approval | No |
| IECEx | Yes |
| ATEX | Yes |
| UKEX | Yes |
| Environmental Product Declaration | |
| Environmental Product Declaration | Yes |
| global warming potential [CO2 eq] | |
| total | 5.42 kg |
| during manufacturing | 5.271 kg |
| during operation | 0 kg |
| after end of life | 0.013 kg |
| ambient conditions | |
| ambient temperature | |
| during operation | -30 ... +60 °C |
| during storage | -30 ... +70 |
| mechanical data | |
| outer diameter / of cable sheath | 10.3 mm |
| material / of the connection cable sheath | PVC |
| color / of cable sheath | Black |
| net weight | 0.5 kg |
| internet links | |
| internet link | |
| to website: Industry Mall | https://mall.industry.siemens.com |
| to web page: selection aid TIA Selection Tool | https://www.siemens.com/tstcloud |
| to web page: system cabling | https://siemens.com/simatic-top-connect |
| to website: Industry Online Support | https://support.industry.siemens.com |
| additional information | |
| other information | technical specifications apply to rated input voltage values and +25 °C ambient temperature (if not otherwise specified) |
| marketing text | The 40-pin round cable (unshielded) with a length of 3.0m is assembled on the side of the I/O card with 40-pin IDC plugs and on the side of the connection module with a 50-pin IDC plug. This pre-assembled cable enables a trouble-free and safe signal flow. Thus, even complex installations remain manageable and can be checked in the shortest possible time, which makes maintenance and expansion affordable. This pre-assembled connecting cable is part of the fully modular SIMATIC TOP connect connection for thefastest and safest system cabling. In addition to low wiring costs, error sources in cabling can be significantly reduced. Sensors and actuators from the peripherals are connected to the connection modules of SIMATIC TOP connect and connected to the SIMATIC S7-1500 via connecting cable and front plug-in module. |