Parameters
Filters
| Title | Parameter | Data type | Default setting | Attributes | Manufacturer | Product category | Operations |
|---|---|---|---|---|---|---|---|
| 0x2C5A:022 | Load encoder/master encoder (SSI) protocol parameters: Monoflop time | U16 | 0 | C | Lenze | i950 | |
| 0x2C5A:023 | Load encoder/master encoder (SSI) protocol parameters: Resulting SSI-telegram cycle time | U16 | - (Read only) | - | Lenze | i950 | |
| 0x2C5F | Parameter CRC of load encoder/master encoder | U32 | - (Read only) | - | Lenze | i950 | |
| 0x2C60 | PPI monitoring: Response | U8 | Fault > CiA402 [1] | - | Lenze | i950, i550 | |
| 0x2C61:001 | Pole position identification (360°) settings: Current amplitude | U16 | 71 % | C | Lenze | i950 | |
| 0x2C61:002 | Pole position identification (360°) settings: Ramp time | U16 | 40 s | C | Lenze | i950 | |
| 0x2C61:003 | Pole position identification (360°) settings: Direction of rotation | U8 | CW [0] | C | Lenze | i950 | |
| 0x2C61:004 | Pole position identification (360°) settings: Error tolerance | U8 | 20 ° | - | Lenze | i950 | |
| 0x2C61:005 | Pole position identification (360°) settings: Absolute current amplitude | U32 | x.xx A (Read only) | - | Lenze | i950 | |
| 0x2C61:006 | Pole position identification (360°) settings: ixt threshold for reversal of rotating direction | U8 | 30 % | - | Lenze | i950 | |
| 0x2C61:010 | Pole position identification (360°) settings: Actual commutation angle | U32 | x.xxx ° (Read only) | - | Lenze | i950 | |
| 0x2C62:001 | Pole position identification (min. movement) settings: Current amplitude | U16 | 25 % | C | Lenze | i950 | |
| 0x2C62:002 | Pole position identification (min. movement) settings: Ramp time | U16 | 10 s | C | Lenze | i950 | |
| 0x2C62:003 | Pole position identification (min. movement) settings: Gain | U16 | 0 % | - | Lenze | i950 | |
| 0x2C62:004 | Pole position identification (min. movement) settings: Reset time | U16 | 62.5 ms | - | Lenze | i950 | |
| 0x2C62:005 | Pole position identification (min. movement) settings: Max. move permitted | U8 | 20 ° | - | Lenze | i950 | |
| 0x2C62:006 | Pole position identification (min. movement) settings: Absolute current amplitude | U32 | x.xx A (Read only) | - | Lenze | i950 | |
| 0x2C63:001 | PPI without movement: Execution | U8 | Disabled [0] | C | Lenze | i950, i550 | |
| 0x2C63:002 | PPI without movement: Current adjust factor | U16 | 100 % | C | Lenze | i950, i550 | |
| 0x2C64:001 | Cable Check: Behavior after switch on | U8 | No action [0] | C | Lenze | i950 | |
| 0x2C64:002 | Cable Check: Status word | U16 | - (Read only) | H | Lenze | i950 | |
| 0x2C65:001 | PPI validation: Activation | U8 | Off [0] | C | Lenze | i950 | |
| 0x2C65:002 | PPI validation: Settings | U8 | No action [0] | - | Lenze | i950 | |
| 0x2C65:003 | PPI validation: Status | U16 | - (Read only) | H | Lenze | i950 | |
| 0x2C65:004 | PPI validation: Pole position set value | I16 | 0.0 ° | - | Lenze | i950 | |
| 0x2C66:001 | PPI mode for 0x6060: Selection | U8 | PPI 360° [1] | C | Lenze | i950 | |
| 0x2C67:001 | MOL settings for 0x6060: Current setpoint 1 | U16 | 71 % | - | Lenze | i950 | |
| 0x2C67:002 | MOL settings for 0x6060: Frequency 1 | I16 | 1.0 Hz | - | Lenze | i950 | |
| 0x2C67:003 | MOL settings for 0x6060: Current 1 - ramp time | U16 | 10 ms | - | Lenze | i950 | |
| 0x2C67:004 | MOL settings for 0x6060: Frequency 1 - ramp time | U16 | 200 ms | - | Lenze | i950 | |
| 0x2C67:005 | MOL settings for 0x6060: Starting angle 1 | I16 | 0.0 ° | - | Lenze | i950 | |
| 0x2C67:006 | MOL settings for 0x6060: Stopping time 1 | U32 | 10000.0 s | C | Lenze | i950 | |
| 0x2C67:011 | MOL settings for 0x6060: Current setpoint 2 | U16 | 71 % | - | Lenze | i950 | |
| 0x2C67:012 | MOL settings for 0x6060: Frequency 2 | I16 | 5.0 Hz | - | Lenze | i950 | |
| 0x2C67:013 | MOL settings for 0x6060: Current 2 - ramp time | U16 | 10 ms | - | Lenze | i950 | |
| 0x2C67:014 | MOL settings for 0x6060: Frequency 2 - ramp time | U16 | 1000 ms | - | Lenze | i950 | |
| 0x2C67:015 | MOL settings for 0x6060: Starting angle 2 | I16 | 0.0 ° | - | Lenze | i950 | |
| 0x2C67:016 | MOL settings for 0x6060: Stopping time 2 | U32 | 10000.0 s | C | Lenze | i950 | |
| 0x2D00:001 | Touch probe (TP) delay time: Touch probe 1 delay time | U16 | 0.000 ms | - | Lenze | i950 | |
| 0x2D00:002 | Touch probe (TP) delay time: Touch probe 2 delay time | U16 | 0.000 ms | - | Lenze | i950 | |
| 0x2D00:003 | Touch probe (TP) delay time: Touch probe 3 delay time | U16 | 0.000 ms | - | Lenze | i950 | |
| 0x2D00:004 | Touch probe (TP) delay time: Touch probe 4 delay time | U16 | 0.000 ms | - | Lenze | i950 | |
| 0x2D01:001 | Touch probe (TP) time stamp: Touch probe 1-rising edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 | |
| 0x2D01:002 | Touch probe (TP) time stamp: Touch probe 1-falling edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 | |
| 0x2D01:003 | Touch probe (TP) time stamp: Touch probe 2-rising edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 | |
| 0x2D01:004 | Touch probe (TP) time stamp: Touch probe 2-falling edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 | |
| 0x2D01:005 | Touch probe (TP) time stamp: Touch probe 3-rising edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 | |
| 0x2D01:006 | Touch probe (TP) time stamp: Touch probe 3-falling edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 | |
| 0x2D01:007 | Touch probe (TP) time stamp: Touch probe 4-rising edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 | |
| 0x2D01:008 | Touch probe (TP) time stamp: Touch probe 4-falling edge time stamp | U32 | x ns (Read only) | - | Lenze | i950 |