6AV2127-1AB00-0LX1
SIMATIC HMI KP8 PN LX, 8 lange Kurzhubtaster, Blechdicke 1-6 mm, PN-Schnittstellen, neutrales Design schwarz, 8 konfigurierbare DI/DO-Pins, 24 V DC durchschleifbar, parametrierbar ab STEP 7 V5.5.
Produktkategorie
Thin ClientsHersteller
SIEMENSProduktreihe
SIMATIC HMI| General information | |
|---|---|
| Product type designation | Key Panel KP8 PN LX (1 ... 6 mm) |
| Control elements | |
| With parameterizable keys | Yes |
| Keyboard | |
| Membrane keyboard | |
| user-definable label membrane keys | No; possible via adjacent display |
| Function keys | with L-pattern at key edge |
| Number of function keys | 8; 19 x 19 mm per button |
| Short-stroke keys | |
| Number of short-stroke keys | 8 |
| Expansions for operator control of the process | |
| DP direct LEDs (LEDs as S7 output I/O) | 8; Adjustable brightness |
| Number of color modes for LED | 5; red, green, blue, yellow, white |
| Direct keys (keys as S7 input I/O) | 8 |
| Installation type/mounting | |
| Mounting type | clamp fastening with additional mounting clips |
| Mounting position | Horizontal, vertical |
| Rack mounting | No |
| Front mounting | Yes; mounting clip - Torx T20 tighten to 0.2 Nm; enclosure - Torx T10 tighten to 0.2 Nm |
| Rail mounting | No |
| Wall mounting/direct mounting | No |
| Mounting in portrait format possible | Yes |
| Mounting in landscape format possible | Yes |
| maximum permissible angle of inclination without external ventilation | 30°; To the front/rear |
| Number of slots for command devices and signaling units | 0 |
| Supply voltage | |
| Type of supply voltage | DC |
| Rated value (DC) | 24 V; 24 V can be looped through connector, interrupted when pulled |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Input current | |
| Current consumption (rated value) | 0.3 A |
| Digital inputs | |
| Number of digital inputs | 8; Max. 8 inputs and outputs (total) |
| Input voltage | |
| Rated value (DC) | 24 V |
| Digital outputs | |
| Number of digital outputs | 8; Max. 8 inputs and outputs (total) |
| Short-circuit protection | Yes |
| Switching capacity of the outputs | |
| with resistive load, max. | 100 mA |
| Output voltage | |
| Rated value (DC) | 24 V; Non-isolated |
| Total current of the outputs | |
| Current per channel, max. | 100 mA |
| Current per group, max. | 800 mA |
| Interfaces | |
| Number of industrial Ethernet interfaces | 2; For the construction of lines and rings without external switch |
| Number of PROFINET interfaces | 2; Incl. switch |
| Industrial Ethernet | |
| Industrial Ethernet status LED | 2; Per port |
| Number of ports of the integrated switch | 2; Per port |
| Protocols | |
| PROFINET | Yes; also 3rd party PLC |
| Supports protocol for PROFINET IO | Yes |
| PROFINET CBA | No |
| IRT | Yes |
| PROFIsafe | No |
| PROFIBUS | No |
| EtherNet/IP | No |
| MPI | No |
| AS-Interface | No |
| EIB/KNX | No |
| Protocols (Ethernet) | |
| TCP/IP | No |
| Redundancy mode | |
| Media redundancy | |
| MRP | Yes |
| Further protocols | |
| AS-Interface Safety at Work | No |
| CAN | No |
| Data-Highway | No |
| DeviceNet | No |
| DeviceNet Safety | No |
| Foundation Fieldbus | No |
| INTERBUS | No |
| INTERBUS-Safety | No |
| Local Operating Network | No |
| MODBUS | No |
| SafetyBUS p | No |
| SERCOS | No |
| SUCOnet | No |
| other bus systems | No |
| Test commissioning functions | |
| Illuminant test | Yes; During switch on |
| Key and signal lamp test | Yes; automatically when switching on |
| EMC | |
| Emission of radio interference acc. to EN 55 011 | |
| Limit class A, for use in industrial areas | Yes; Group 1, measured at a distance of 10 m |
| Limit class B, for use in residential areas | No |
| Degree and class of protection | |
| IP (at the front) | IP64 |
| IP (rear) | IP20 |
| NEMA (front) | |
| Enclosure Type 4 at the front | No |
| Enclosure Type 4x at the front | No |
| Enclosure Type 12 at the front | No |
| Standards, approvals, certificates | |
| CE mark | Yes |
| CSA approval | No |
| UL approval | No |
| cULus | No |
| FM approval | No |
| RCM (formerly C-TICK) | No |
| KC approval | No |
| EAC (formerly Gost-R) | No |
| CCC | No; not necessary |
| Suitable for safety functions | No |
| Marine approval | No |
| Use in hazardous areas | |
| ATEX Zone 2 | No |
| ATEX Zone 22 | No |
| cULus Class I Zone 1 | No |
| cULus Class I Zone 2, Division 2 | No |
| FM Class I Division 2 | No |
| Marine approval | |
| Germanischer Lloyd (GL) | No |
| American Bureau of Shipping (ABS) | No |
| Bureau Veritas (BV) | No |
| Det Norske Veritas (DNV) | No |
| Lloyds Register of Shipping (LRS) | No |
| Nippon Kaiji Kyokai (Class NK) | No |
| Polski Rejestr Statkow (PRS) | No |
| Ambient conditions | |
| Ambient temperature during operation | |
| min. | 0 °C |
| max. | 60 °C |
| Operation (vertical installation) | |
| For vertical installation, min. | 0 °C |
| For vertical installation, max. | 60 °C |
| Operation (max. tilt angle) | |
| At maximum tilt angle, min. | 0 °C |
| At maximum tilt angle, max. | 60 °C |
| Operation (vertical installation, portrait format) | |
| For vertical installation, min. | 0 °C |
| For vertical installation, max. | 60 °C |
| Operation (max. tilt angle, portrait format) | |
| At maximum tilt angle, min. | 0 °C |
| At maximum tilt angle, max. | 60 °C |
| Ambient temperature during storage/transportation | |
| min. | -20 °C |
| max. | 70 °C |
| Relative humidity | |
| Operation, max. | 95 %; no condensation |
| Configuration | |
| Configuration software | |
| STEP 7 Basic (TIA Portal) | Yes |
| STEP 7 Professional (TIA Portal) | Yes |
| Functionality under WinCC (TIA Portal) | |
| Process coupling | |
| S7-1200 | Yes; with ET 200pro CPU and ET 200S CPU |
| S7-1500 | Yes |
| S7-200 | No |
| S7-300/400 | Yes; with F-CPU: STEP 7 V11 SP1 (or higher) and Safety V11 (or higher) or SIMATIC STEP 7 Basic V11 (or higher) |
| LOGO! | No |
| WinAC | Yes |
| SINUMERIK | No |
| SIMOTION | No |
| Allen Bradley (EtherNet/IP) | No |
| Allen Bradley (DF1) | No |
| Mitsubishi (MC TCP/IP) | No |
| Mitsubishi (FX) | No |
| OMRON (FINS TCP) | No |
| OMRON (Host Link) | No |
| Modicon (Modbus TCP/IP) | No |
| Modicon (Modbus RTU) | No |
| Mechanics/material | |
| Enclosure material (front) | Bayblend FR3010 enclosure, Autotex F150 front membrane |
| Plastic | Yes; neutral enclosure, black RAL 9005 |
| Aluminum | No |
| Stainless steel | No |
| Service life | |
| Short-stroke keys (in switching cycles) | 1 500 000 |
| LEDs (ON period) | 100 % |
| Dimensions | |
| Width of the housing front | 40.7 mm |
| Height of housing front | 252.4 mm |
| Mounting cutout, width | 24 mm; tolerances +0.5 mm, not including connection plug (depending on connector type) |
| Mounting cutout, height | 244 mm; tolerances +0.5 mm, not including connection plug (depending on connector type) |
| mounting depth | 68.15 mm; mounting plate thickness max. 1 ... 6 mm |
| Weights | |
| Weight (without packaging) | 297 g |
| Weight (with packaging) | 475 g; incl. 1x 12-pole connector and 6x mounting clips |
| Other | |
| Merchandise | Yes; KS28603 |
| Manufacturer name | GETT Gerätetechnik GmbH |
| Manufacturer's address | Mittlerer Ring 1, 08233 Treuen (Vogtland), Germany |
| Note: | Key Panel must be configured as 6AV3688-3AY36-0AX0 Key Panel, compatible with 6AV2127-1AB00-0LX0 |
| Approvals / Certificates | |