6ES7336-4GE00-0AB0
Produktkategorie
AnalogmoduleHersteller
SIEMENSProduktreihe
S7-300| Supply voltage | |
|---|---|
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Load voltage L+ | |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Input current | |
| From power supply L+, typ. | 150 mA |
| from backplane bus 5 V DC, max. | 90 mA |
| Power loss | |
| Power loss, typ. | 4.5 W |
| Analog inputs | |
| Number of analog inputs | 6 |
| permissible input current for current input (destruction limit), max. | 40 mA |
| Input ranges | |
| Voltage | No |
| Current | Yes |
| Thermocouple | No |
| Resistance thermometer | No |
| Resistance | No |
| Input ranges (rated values), currents | |
| 0 to 20 mA | Yes |
| Input resistance (0 to 20 mA) | 150 Ω; typ. 150 ohms max. 175 ohms |
| 4 mA to 20 mA | Yes |
| Input resistance (4 mA to 20 mA) | 150 Ω; typ. 150 ohms max. 175 ohms |
| Cable length | |
| shielded, max. | 1 000 m |
| Analog value generation for the inputs | |
| Integration and conversion time/resolution per channel | |
| Resolution with overrange (bit including sign), max. | 16 bit; 15 bit + sign |
| Integration time (ms) | 20 ms @ 50 Hz, 16.7 ms @ 60 Hz |
| Interference voltage suppression for interference frequency f1 in Hz | f=n x (f1 ±0.5 %) |
| Encoder | |
| Connection of signal encoders | |
| for current measurement as 2-wire transducer | Yes |
| for current measurement as 4-wire transducer | Yes |
| Errors/accuracies | |
| Operational error limit in overall temperature range | |
| Current, relative to input range, (+/-) | 0.2 %; 40 µA |
| Basic error limit (operational limit at 25 °C) | |
| Current, relative to input range, (+/-) | 0.1 % |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
| Diagnostic alarm | Yes |
| Diagnoses | |
| Diagnostic information readable | Yes |
| Diagnostics indication LED | |
| Fail-safe operation | Yes |
| Group error SF (red) | Yes |
| Encoder supply Vs (green) | No |
| Potential separation | |
| Potential separation analog inputs | |
| between the channels | Yes |
| between the channels and backplane bus | Yes |
| between the channels and the power supply of the electronics | Yes |
| Isolation | |
| Isolation tested with | 370V for 1 min |
| Standards, approvals, certificates | |
| Highest safety class achievable in safety mode | |
| acc. to EN 954 | 4 |
| Performance level according to ISO 13849-1 | e |
| SIL acc. to IEC 61508 | SIL 3 |
| Connection method | |
| required front connector | 20-pin |
| Dimensions | |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 120 mm |
| Weights | |
| Weight, approx. | 350 g |
| Approvals / Certificates | |