6ES7222-1XF32-0XB0
SIMATIC S7-1200, ieșire digitală SM 1222, 8 DO, contact de comutare cu releu.
Categorie de produs
Signal modulesProducător
SIEMENSSerie de produse
S7-1200| General information | |
|---|---|
| Product type designation | SM 1222, DQ 8x relay/2 A |
| Supply voltage | |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Input current | |
| from backplane bus 5 V DC, max. | 140 mA |
| Digital outputs | |
| from load voltage L+, max. | 16.7 mA/relay coil |
| Power loss | |
| Power loss, typ. | 5 W |
| Digital outputs | |
| Number of digital outputs | 8 |
| in groups of | 1 |
| Short-circuit protection | No; to be provided externally |
| Switching capacity of the outputs | |
| with resistive load, max. | 2 A |
| on lamp load, max. | 30 W with DC, 200 W with AC |
| Output voltage | |
| Rated value (DC) | 5 V DC to 30 V DC |
| Rated value (AC) | 5 V AC to 250 V AC |
| Output current | |
| for signal "1" rated value | 2 A |
| Output delay with resistive load | |
| "0" to "1", max. | 10 ms |
| "1" to "0", max. | 10 ms |
| Total current of the outputs (per group) | |
| horizontal installation | |
| up to 50 °C, max. | 2 A; Current per mass |
| Relay outputs | |
| Number of relay outputs | 8 |
| Rated supply voltage of relay coil L+ (DC) | 24 V |
| Number of operating cycles, max. | mechanically 10 million, at rated load voltage 100 000 |
| Switching capacity of contacts | |
| with inductive load, max. | 2 A |
| on lamp load, max. | 30 W with DC, 200 W with AC |
| with resistive load, max. | 2 A |
| Cable length | |
| shielded, max. | 500 m |
| unshielded, max. | 150 m |
| Interrupts/diagnostics/status information | |
| Alarms | |
| Diagnostic alarm | Yes |
| Diagnostics indication LED | |
| for status of the outputs | Yes |
| Potential separation | |
| Potential separation digital outputs | |
| between the channels | Relays |
| between the channels, in groups of | 1 |
| between the channels and backplane bus | 1 500 V AC for 1 minute |
| Permissible potential difference | |
| between different circuits | 750 V AC for 1 minute |
| Degree and class of protection | |
| IP degree of protection | IP20 |
| Standards, approvals, certificates | |
| CE mark | Yes |
| CSA approval | Yes |
| UL approval | Yes |
| cULus | Yes |
| FM approval | Yes |
| RCM (formerly C-TICK) | Yes |
| KC approval | Yes |
| Marine approval | Yes |
| Ecological footprint | |
| environmental product declaration | Yes |
| Global warming potential | |
| global warming potential, (total) [CO2 eq] | 68.6 kg |
| global warming potential, (during production) [CO2 eq] | 8.16 kg |
| global warming potential, (during operation) [CO2 eq] | 60.7 kg |
| global warming potential, (after end of life cycle) [CO2 eq] | -0.334 kg |
| Ambient conditions | |
| Free fall | |
| Fall height, max. | 0.3 m; five times, in product package |
| Ambient temperature during operation | |
| min. | -20 °C |
| max. | 60 °C; Number of simultaneously activated outputs: 4 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 at 55 °C horizontal or 45 °C vertical |
| horizontal installation, min. | -20 °C |
| horizontal installation, max. | 60 °C |
| vertical installation, min. | -20 °C |
| vertical installation, max. | 50 °C |
| permissible temperature change | 5°C to 55°C, 3°C / minute |
| Ambient temperature during storage/transportation | |
| min. | -40 °C |
| max. | 70 °C |
| Air pressure acc. to IEC 60068-2-13 | |
| Storage/transport, min. | 660 hPa |
| Storage/transport, max. | 1 080 hPa |
| Relative humidity | |
| Operation at 25 ℃ without condensation, max. | 95 % |
| Connection method | |
| required front connector | Yes |
| Mechanics/material | |
| Enclosure material (front) | |
| plastic | Yes |
| Dimensions | |
| Width | 70 mm |
| Height | 100 mm |
| Depth | 75 mm |
| Weights | |
| Weight, approx. | 310 g |
| Approvals / Certificates | |