6AG1321-1FF10-7AA0

Termékkategória

Digitális modulok

Gyártó

SIEMENS

Termékcsalád

S7-300

General information
based on	6ES7321-1FF10-0AA0
Product function
Isochronous mode	No
Supply voltage
Load voltage L1
Rated value (AC)	230 V; 120/230 V AC; all load voltages must have the same phase.
Input current
from backplane bus 5 V DC, max.	100 mA
Power loss
Power loss, typ.	4.9 W
Digital inputs
Number of digital inputs	8
Input characteristic curve in accordance with IEC 61131, type 1	Yes
Number of simultaneously controllable inputs
horizontal installation
up to 60 °C, max.	8; 8 @ > 60 °C
Input voltage
Type of input voltage	AC
Rated value (AC)	120 V; 120/230 V AC (47 ... 63 Hz)
for signal "0"	0 to 40V
for signal "1"	79 to 264V
Input current
for signal "1", typ.	7.5 mA; (120 V); 17.3 mA (230 V)
Input delay (for rated value of input voltage)
for standard inputs
parameterizable	No
at "0" to "1", max.	25 ms
at "1" to "0", max.	25 ms
Cable length
shielded, max.	1 000 m
unshielded, max.	600 m
Encoder
Connectable encoders
2-wire sensor	Yes
permissible quiescent current (2-wire sensor), max.	2 mA
Interrupts/diagnostics/status information
Alarms	No
Diagnostics function	No
Alarms
Diagnostic alarm	No
Hardware interrupt	No
Diagnostics indication LED
Group error SF (red)	No
Status indicator digital input (green)	Yes
Potential separation
Potential separation digital inputs
between the channels	Yes
between the channels, in groups of	1
between the channels and backplane bus	Yes; Optocoupler
Isolation
Isolation tested with	1 500 V AC
Standards, approvals, certificates
CE mark	Yes
UL approval	Yes; File E239877
RCM (formerly C-TICK)	Yes
KC approval	Yes
EAC (formerly Gost-R)	Yes
Ambient conditions
Ambient temperature during operation
min.	-25 °C
max.	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use
Ambient temperature during storage/transportation
min.	-40 °C
max.	70 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.	5 000 m
Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Relative humidity
With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust, *
Use on ships/at sea
to biologically active substances according to EN 60721-3-6	Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request
to chemically active substances according to EN 60721-3-6	Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
to mechanically active substances according to EN 60721-3-6	Yes; Class 6S3 incl. sand, dust; *
Usage in industrial process technology
Against chemically active substances acc. to EN 60654-4	Yes; Class 3 (excluding trichlorethylene)
Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04	Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
Remark
Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04	* The supplied plug covers must remain in place over the unused interfaces during operation!
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	240 g
Approvals / Certificates