6ES7332-5HD01-0AB0

SIMATIC S7-300, analog output SM 332, isolated, 4 AO, U/I; diagnostics; resolution 11/12 bits, 20-pole, removing and inserting with active backplane bus possible

Siemens spare part — S7-300 product cancellation (PM410, 1 October 2025); available as a spare part until 2033.

Termékkategória

Analóg modulok

Gyártó

SIEMENS

Termékcsalád

S7-300

General information
Product function
Isochronous mode	No
Supply voltage
Load voltage L+
Rated value (DC)	24 V
Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	240 mA
from backplane bus 5 V DC, max.	60 mA
Power loss
Power loss, typ.	3 W
Analog outputs
Number of analog outputs	4
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
0 to 10 V	Yes
1 V to 5 V	Yes
-10 V to +10 V	Yes
Output ranges, current
0 to 20 mA	Yes
-20 mA to +20 mA	Yes
4 mA to 20 mA	Yes
Connection of actuators
for voltage output four-wire connection	Yes
for current output two-wire connection	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	1 kΩ
with voltage outputs, capacitive load, max.	1 µF
with current outputs, max.	500 Ω
with current outputs, inductive load, max.	10 mH
Cable length
shielded, max.	200 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
Resolution with overrange (bit including sign), max.	12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit
Conversion time (per channel)	0.8 ms
Settling time
for resistive load	0.2 ms
for capacitive load	3.3 ms
for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational error limit in overall temperature range
Voltage, relative to output range, (+/-)	0.5 %
Current, relative to output range, (+/-)	0.6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output range, (+/-)	0.4 %
Current, relative to output range, (+/-)	0.5 %
Interrupts/diagnostics/status information
Diagnostics function	Yes; Parameterizable
Substitute values connectable	Yes; Parameterizable
Alarms
Diagnostic alarm	Yes; Parameterizable
Diagnoses
Diagnostic information readable	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Potential separation
Potential separation analog outputs
between the channels	No
between the channels and backplane bus	Yes
Between the channels and load voltage L+	Yes
between the channels and the power supply of the electronics	Yes
Isolation
Isolation tested with	500 V DC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	117 mm
Weights
Weight, approx.	220 g
Approvals / Certificates